KYMCO K-XCT 125i User Manual

19. STARTING SYSTEM
19
-
3
K-XCT 125i
STARTER MOTOR
INSPECTION
Disconnect the starter motor cable from the
start relay.
Connect the start motor cable directly to the
battery positive terminal.
If the starter motor fail to work, the starter
motor is faulty.
REMOVAL
Turn the ignition switch turned to “OFF”
position.
Release the rubber cap (1) and remove the
terminal screw (2) to disconnect the start
motor cable from the start motor.
Remove two mounting bolts (3) , then remove
the start motor.
(1)
(2)
(3)

KYMCO K-XCT 125i Specifications

General

Brand	KYMCO
Model	K-XCT 125i
Category	Motorcycle
Language	English