SECTION 2 - CONTROLS&FEATURES
IGNITION SWITCH
To operate the ignition switch and it's functions:
With the ignition key in the " " position (the
engine is not running), turn the counterclockwise
“ ” Position:
All electrical circuits are off. The engine will not
from the " " to the
" "
position.
start or run.
“ ” Position:
The ignition circuit is "ON" and engine can be
started. The key can’t be removed from the
ignition switch in this position.
“ ” Position:
To lock the steering, turn the handlebar all the way
to the left, push down and turn the key to the " "
position and remove the key. All electrical circuits
are off.
“ ” Position:
With the ignition key at the " " position (the
engine is running), push the key in and turn it
counterclockwise from " " to the
" "
position.
8
With the ignition key in the “ ” position, turn
the key counterclockwise from “ ” to“ ”
position.Pull up on the back portion of the seat
to lift it up.
To Next Page
Loading...
Need help?
General
