Starting the engine
OPERATION
Always follow the proper starting procedure
described here and on the following pages.
CAUTION
To protect the catalytic converter in the engine's
exhaust muffler, avoid idling too long and do not
use leaded gasoline.
CAUTION
To prevent damage to the starter motor, do not
operate the starter motor for more than 5
seconds at a time. If fail to start successfully,
check the fuel level and the battery condition, and
waiting for 15 seconds between each fail to start.
1.Check oil and gasoline content before starting the
engine.
2.Position the motorcycle by the center stand
and put the side stand up.
3.Insert the ignition key and turn it to " ".
The Main Power is cut off when the Engine Stop
Switch is set to the
position, therefore pulling
the Brake Lever and pushing the Start Button will
not activate the motor.
To Next Page
Loading...
Need help?
General
