EasyManua.ls Logo

KYMCO LIKE 50i - Tire Wear and Condition Check

KYMCO LIKE 50i
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE
Tires Inspection
Tire wear changes the tire profile and may
affect the vehicles handling characteristics.
Check the tire condition before each riding.
Replace the tires if tread depth is less than
the following limit:
Tire tread wear limit: FRONT 1.6 mm
REAR 2.0 mm
NOTE: Measure the tread depth , do
not judge by a visual inspection.
NOTE: Be sure to balance the wheel after
repairing a puncture or the tire. Proper wheel
balance is important to avoid variable contact
between tire and ground, and to avoid uneven tire
wear.
NOTE: Replace the tires if theres visual
evidence of damage as cracks or cuts.
WARNING
An improperly repaired, installed, or
balanced tire can cause you to lose
control of your scooter or shorten tire life.
Ask the authorized KYMCO dealer, or a
qualified tire shop to perform tire repair,
replacement, and balancing due to the
proper tools and experience are required.
Always install tires according to the
rotation direction shown by arrow on the
sidewall of each tire.
1
2
49

Related product manuals