CONTROLS & FEATUREs
Suspension
Each shock absorber assembly is equipped with a
spring preload adjusting ring.
Adjust the spring preload as follows.
To increase the spring preload and thereby harden
the suspension, turn the adjusting ring on each shock
absorber assembly in direction (a). To decrease the
spring preload and thereby soften the suspension,
turn the adjusting ring on each shock absorber
assembly in direction (b).
Align the appropriate notch in the adjusting ring with
the position indicator on the shock absorber.
1. Spring preload adjusting ring
2. Position indicator
3. Spring preload adjusting too
WARNING
Be certain to adjust both shock absorbers
to the same spring preload positions.
Improper setting of shock absorber will
cause unstable handling and might lead
to an accident.
To Next Page
Loading...
