Right handlebar switch
Starter button①:
Press starter button " " and pull brake lever
in the meantime to actuate the starter motor.
▆NOTE: Hold the left brake lever, or the starter motor
won’t work. Don’t press the starter button while the
engine is running. while the engine is running
Engine stop switch②
At this position, engine is stopped and can’t
be started; it requires switching back to
“ ” position to start the engine.
At this position, starting the engine is
allowed. During normal riding, put the
Engine Stop Switch at “ ” position. In the
event of emergency, such as fuel cable jam
or vehicle tumbling ,turn the switch to “ ”
position to force-stop the engine.
▆NOTE: If the ignition system is on, which might
cause the battery to discharge gradually.
To Next Page
Loading...
Need help?
General
