42
Thi
ngs t
o k
now
12
.
0
Things t
o know
12.1 The battery charger - functioning principle
The battery charger regulates the voltage
(Volt) and the current (Ampere) from your
mains connection down to the voltage
required for charging your batteries (24 Volt).
The amount of charging current required is
dependent on the charging state of the
discharged batteries.
Batteries mostly discharged = more charging current
Batteries half discharged
= decreased charging current
Batteries completely charged = no
charging current
Since n
o charging current is flowing when the batteries are full,
the batteries cannot be overcharged.
12.2
The Batteries
The entire power supply is taken over by
two cycle-proof 12 V batteries.
The Scooter is fitte
d with 22 Ah
(Amp-hou
r) batteries.
Only enclosed maintenance-free deep cycle
batteries are used.
The batteries located in the removable
battery case beneath the seat.
• The 22 Ah batteries are located in one
bat
tery case
22 Ahx 2
The batt
e
ry case fitted with 22 Ahbatteries
is fitted with its
own charging socket. This
means that it is possible to charge the
batteries when separated from the scooter
(Chapter
11.1.2).
To Next Page
Loading...
Need help?
General