Repairs -
b
atteries
17.7.2 Replacing the batteries
Fire and burn hazard if battery terminal is
short-circuited!
•
Never
touch the positive
and
negative battery terminals
sim
ultaneously with metal
par
ts (short-circuiting).
Opening the battery
case
Remove the battery
cas
e
as
described in chapter 13.
Remove all six bolts (1) on the bottom
of the battery case.
Put the battery case down on its bottom
side and open it.
Loosening the battery
cable
Rem
oving the batteries
, to do this:
1. First remove the cable from the battery
negative terminal (-).
2. Then remove the cable from the
battery positive terminal (+).
Connecting the battery
cable
In
sert the battery and connect the battery
cables in reverse order:
1. First connect the cable to the battery
positive terminal (+).
2. Then connect the cable to the battery
negative terminal (-) .
Close the battery case, screw in all the
bolts and tighten.
66