T
r
oubleshooting
16.3 Operation indicator blink codes
The operation indicator (1) on the dashboard
is also designed as a display for error
messages.
Various faults in the drive electronics are
displayed using blink sequence
as listed.
16.3
.1 Blink list
58
Instrument indicator
Error code LED indicator Cause
slight blink Auto switch off
(scootor idle 20min )
，
KEY-ON again
0
02,003 8xblink Fault in ECU or wires
0203,0204 8xblink Fault in ECU or wires
0810 0814~17 7xblink Fault in drive lever, Lever does not reset
1000 blinking quickly Charging the scootor, scootor does not run
1400 3xblink Fault to motor brake or wires
1500 ~1502 9xblink Fault to motor brake
1600 10xblink Battery voltage too low
1705 8xblink Fault in ECU or wires
1802 1805 8xblink Fault in ECU or wires
1B20 8xblink Fault in ECU or wires
1D02 7xblink Fault in drive lever, Lever does not reset
1E03
6xblink Charging the scootor, scootor does not run
2102 8xblink Fault in ECU or wires
2C00,2C01 1xblink contiute slowly Batteries voltage too low
2D01 8xblink Fault in ECU or wires
3100 3102 8xblink Fault in ECU or wires
3210 3213 8xblink Fault in ECU or wires
3600~360E 8xblink Fault in ECU or wires
3B01 2xblink Motor cable short-circuited
4401 8xblink wir
ing fault
7
000~7001 4xblink Parking brake off
To Next Page
Loading...
Need help?
General