KYMCO MXU 150 User Manual

SPARK ARRESTER CLEANING
Be sure the exhaust pipe and muffler are cool
before cleaning the spark arrester.
1. Remove the bolt.
2. Remove the tailpipe by pulling it out of the
muffler.
3. Tap the tailpipe lightly, then use a wire brush
to remove any carbon deposits from the spark
arrester portion of the tailpipe.
4. Insert the tailpipe into the muffler and align
the screw holes.
5. Install the bolt and tighten it.
(1) Bolt
(1) Tailpipe (2) Spark arrester
(1)
(1)
(2)
180

KYMCO MXU 150 Specifications

General

Brand	KYMCO
Model	MXU 150
Category	Offroad Vehicle
Language	English