3. INSPECTION/ADJUSTMENT
3-18
ATV 50
CABLE INSPECTION AND
LUBRICATION
Inspect the cable sheath.
Replace if damage.
Check the cable operation.
Lubricate or replace if unsmooth operation.
LEVER LUBRICATION
Lubricate the pivoting parts of each lever.
FRONT/REAR SUSPENSION
LUBRICATION
Inject grease into the nipples using a grease
gun until slight over flow is observed from
the thrust covers.
ipple
Damaged cable sheath may cause
corrosion and interfere with the cable
movement. An unsafe condition may
result so replace such cable as soon as
possible.
＊
Wipe off the excess grease.
＊
Hold cable end high and apply several
dro
To Next Page
Loading...
Need help?
General
