KYMCO MXU 50 REVERSE Service Manual

6. ENGINE REMOVAL/INSTALLATION
6-5
ATV 50
Remove the engine any connector thing.
Remove the rear right engine bracket
bolt/nut (MXU 50/MX’ER 50).
Remove the front right engine bracket
bolt/nut.
Remove the front left engine bracket
bolt/nut.
Remove the rear left engine bracket
bolt/nut.
Remove the engine to the right side of the
frame.
ENGINE INSTALLATION
Install the engine and tighten the engine
mounting bolts/nuts.
Torque: 4 kgf-m (40 N-m, 29 lbf-ft)
Install the removed parts in the reverse
order of removal.
Bolt/NUT
Bol
t
/Nu
t
Bolt
/
Nu
t
Bolt/Nu
t
Route the wires and cables properly.
＊

KYMCO MXU 50 REVERSE Specifications

General

Brand	KYMCO
Model	MXU 50 REVERSE
Category	Offroad Vehicle
Language	English