KYMCO MXU 50 REVERSE Service Manual

4. LUBRICATION SYSTEM
4-4
ATV 50
Oil Pump Driven Gea
r
Bolts
N
u
t
OIL PUMP INSTALLATION
Install the oil pump onto the crankcase.
Install the oil pump control cable plate.
Connect the oil inlet line and oil outlet line
properly.
Connect the oil pump control cable.
Bleed air from the oil pump.
• Lubricate the O-ring with grease or
engine oil before installation.
• Make sure that the oil pump is inserted
into the crankcase.
• Apply molybdenum disulfide or
grease to the pump pinion.
＊
Grease or Engine Oil
Control Cable
Oil Outlet Line
Oil Inlet Line

KYMCO MXU 50 REVERSE Specifications

General

Brand	KYMCO
Model	MXU 50 REVERSE
Category	Offroad Vehicle
Language	English