－－5
3. OPERATION INSTRUCTIONS
(1) IGNITION SWITCH/STEERING&HANDLEBAR LOCK
: At this position, power is connected to start the
ON
engine. The key cannot be taken out.
: At this position, power is cut off and the engine
OFF
stops. The key can be taken out.
: At this position, the steering handlebar is locked.LOCK
The key can be taken out
《》Locking Method
Turn the steering handlebar left to the full and then push
and turn the ignition switch key left to the " " position
he handlebar can be locked.
LOCK
,t
《》Unlocking Method
Turn the ignition switch key right to the" " and the
automatically.
OFF
" " is releasedLOCK
After locking, turn the handlebar gently to make sure
that it is locked.
Do not turn the ignition switch to the" " Position
otherwise the handlebar will be out of
cause accidents.
Don't park your motorcycle at a place to hinder the traffic.
LOCK
during riding,
control and
CAUTION:
To Next Page
Loading...
Need help?
General