KYMCO SPIKE 125 User Manual

－－17
(12) DRIVE CHAIN INSPECTION/ ADJUSTMENT
(11) CHOKE KNOB
The chain should have a slack of 1 2cm in its center～
between the two sprockets.
Adjustment: Loosen the rear axle nut and turn the
adjusting nut until the index mark is aligned with the
punch mark on the adjuster. Then tighten the rear axle
nut.
Rear Axle Nut Adjusting Nut
The rear wheel will move backward during adjustment, so
the rear brake free play shall also be adjusted.
For cold starting, pull down the choke knob. After the
engine warms up, restore the choke knob to its original
position.

Do not use the choke knob for a long time; otherwise the
mixture will become too rich and cause engine stop.

CAUTION:
LIGHTS
OFF
ON
.

KYMCO SPIKE 125 Specifications

General

Displacement	124.6 cc
Starting System	Electric & Kick
Fuel System	Carburetor
Transmission	CVT
Front Suspension	Telescopic Fork
Front Brake	Disc
Rear Brake	Drum
Seat Height	780 mm
Ignition	CDI
Bore x Stroke	52.4 x 57.8 mm
Max Torque	9.5 Nm @ 6500 rpm

Summary

PRECAUTIONS FOR SAFE RIDING

Rider Clothing Recommendations

Motorcycle Riding Techniques

OPERATION INSTRUCTIONS OVERVIEW

Ignition and Steering Lock Operation

Details on the ignition switch positions (ON, OFF, LOCK) and how to lock the steering.

Electric Starter Button Usage

Procedure and cautions for using the electric starter button to start the engine.

Instrument Panel Indicators Explained

PRE-RIDE INSPECTION GUIDE

General Pre-Ride Checks

Emphasizes the importance of pre-ride checks to prevent damage and accidents.

Brake System Inspection

Steps to inspect the front and rear brake levers and pedals for proper function and free play.

Tire Cracks and Damage Inspection

Instructions to inspect tires for cracks and damage.

Fuel Level Check and Refueling

Steps for checking the fuel level and refilling the tank with the correct gasoline.

Brake Lever Free Play Adjustment

How to inspect and adjust the free play in the rear brake pedal.

Engine Oil Level Check and Refill

Procedure for checking and refilling the engine oil to ensure proper lubrication.

Tire Condition and Pressure Check

Guidance on checking tire pressure, condition, and wear indicators.

Tire Abnormal Wear Check

How to identify and check for abnormal wear patterns on the tires.

Braking Performance Test

Method to test the motorcycle's braking performance.

Tire Foreign Object Inspection

Procedure for checking tires for embedded debris like metal pieces or gravel.

Tire Tread Depth Check

How to check the tire tread depth against wear limit marks and when to replace the tire.

ENGINE STARTING METHODS

Ignition Switch to ON Position

Steps to turn the ignition switch to the ON position and unlock the handlebar.

Electric Starter Operation Guide

Comprehensive guide on using the electric starter, including throttle and choke usage.

Kick Lever Starting Procedure

Neutral Position Starting

Importance of starting the engine in neutral and checking the neutral indicator.

NORMAL RIDING METHODS

Starting Engine and Initial Checks

Correct Rider Sitting Posture

Gear Shifting Technique

PRECAUTIONS FOR RIDING

Safe Riding Practices

Avoiding Sudden Stops and Turns

Throttle Control for Speed

Proper Braking Technique

Correct technique for applying both brakes simultaneously for safe stopping.

Rainy Day Riding Safety

HOW TO STOP RIDING

Stopping Near Parking Area

How to signal, slow down, and stop near a parking area.

Motorcycle Parking Guidelines

Engine Shutdown Procedure

Procedure for turning off the engine and ignition after the motorcycle has fully stopped.