EasyManuals Logo

KYMCO SPIKE 125 User Manual

KYMCO SPIKE 125
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
--34
(7) SPARK PLUG INSPECTION
Check the spark plug side electrodes for wear.
Fouling deposits on spark plug electrodes and big gap may
result in weak spark.
Spark Plug Removal:
1.Remove the spark plug with a spark plug remover.
2.The installation sequence is the reverse of removal.
Spark Plug Cleaning:
1.It is better to remove spark plug deposits with a spark plug
cleaner.
2.If a spark plug cleaner is not available, clean with a wire
brush.
The side electrode gap is 0.6 0.7mm.
Specified Spark Plug:
Decarbonizing Cracks, Damage Gap, Wear,
Fouling Deposits
~
NGK-CR7HSA
Clean the spark plug at every 2000km and replace it with a
new one at every 5000km or when the center electrode is
burned out.
First screw in the spark plug with fingers and then tighten
with a spark plug wrench.
Use unspecified spark plug may damage the engine.
CAUTION:

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KYMCO SPIKE 125 and is the answer not in the manual?

KYMCO SPIKE 125 Specifications

General IconGeneral
BrandKYMCO
ModelSPIKE 125
CategoryScooter
LanguageEnglish

Related product manuals