(5) FUSE CHANGE
Turn off the main switch and check if the fuse is burned
out.
When the fuse is burned out, replace with a specified fuse.
Check for the cause of breakdown before replacing.
Ignition Switch Fuse Specification:10A
Be careful not to excessively expand the fuse clip during
removal.
After a new fuse is installed, check the fuse clip for
looseness which is the main cause of trouble.
Never use fuse of unspecified capacity, it may cause wire
overheating and burning out.
When replacing electric appliances (lights, instruments),
be sure to use the recommended genuine parts.
When washing the motorcycle, avoid flushing it.
If the cause can not be found, contact our distributor or
service station for inspection.
CAUTION:
－－32
To Next Page
Loading...
Need help?
General