(3) BRAKE INSPECTION
Ride the motorcycle at low speed on a dry road and
respectively apply the front brake lever and rear brake
brake performance.
The brake lever should have proper free play.
"Free play" means the distance from the position of
brake to the position of fully applied brake.
Measure the free play at the brake lever pedal end and
is within the specified value of (2 cm rear
brake).
～3
pedal to check the
loose
check if it
(4) TIRE INSPECTION
1. TIRE PRESSURE CHECK
Check if the tire pressure is normal when the tire is in
contact with level ground.
If there is any abnormal condition, check the tire pressure
with a tire pressure gauge.
Measure the tire pressure under room temperature.
The tire pressure must not overpass 2.50kg/cm
2
U
.
S
.
To Next Page
Loading...
Need help?
General