KYMCO SUPER8 50 User Manual

3. INSPECTION/ADJUSTMENT
3-7
SUPER8 50
FINAL REDUCTION GEAR OIL
OIL LEVEL CHECK
Stop the engine and remove the oil check bolt.
The oil level shall be at the oil check bolt
hole.
If the oil level is low, add the recommended
oil to the proper level.
Recommended Oil: SAE90#
Install the oil check bolt.
OIL CHANGE
Remove the oil check bolt.
Remove the oil drain bolt and drain the oil
thoroughly.
Install the oil drain bolt.
Torque: 0.8~1.2kgf-m
Fill with the recommended oil.
Oil Capacity: At disassembly : 0.20 liter
At change : 0.18 liter
Reinstall the oil check bolt and check for oil
leaks.
Torque:0.8~1.2kgf-m
DRIVE BELT
Remove the left crankcase cover. (
Ö
9-2)
Inspect the drive belt for cracks or excessive
wear.
Replace the drive belt with a new one if
necessary and in accordance with the
Maintenance Schedule.
Drive Bel
t
Oil Check Bolt/Sealing Washe
r
Place the motorcycle on its main stan
d
on level ground for oil level check.
＊
Make sure that the sealing washer is in
good condition.
＊
Oil Check Bolt Hole
Oil Drain Bolt/ Sealing Washe
r
Make sure that the sealing washer is in
good condition.
＊

KYMCO SUPER8 50 Specifications

General

Brand	KYMCO
Model	SUPER8 50
Category	Scooter
Language	English