5. FUEL SYSTEM
5-13
SUPER8 50
FUEL TANK REMOVE
Remove the net-in box. (
Ö
2-3)
Remove the frame center cover.
Remove the frame body cover. (
Ö
2-3)
Remove the four bolts on the fuel tank。
Disconnect the fuel unit wire connector.
Remove the fuel tank.
The installation sequence is the reverse of
removal.
FUEL STRAINER REMOVAL
Remove the fuel strainer from the fuel tank.
INSPECTION
Inspect if the fuel strainer is clogged and
clean it with compressed air.
INSTALLATION
Install the fuel strainer with its arrow mark
toward the fuel pump.
Bolts
• When removing the fuel strainer, do
not allow flames or sparks near the
working area and drain the residual
gasoline into a container.
＊
Arrow Mar
To Next Page
Loading...
Need help?
General
