KYMCO SUPER8 50 User Manual

7. CYLINDER HEAD/VALVES
7-10
SUPER8 50
Install the camshaft holder, washers and nuts
on the cylinder head.
Tighten the four cylinder head nuts and two
bolts.
Torque: Cylinder head nut: 1.8~2.2kgf-m
CAM CHAIN TENSIONER
INSTALLATION
First install a new cam chain tensioner gasket.
Install the tensioner using the two bolts.
Install the tensioner spring.
Install the O-ring and sealing bolt.
Torque:: 0.45~0.6kgf-m
Adjust the valve clearance. (
Ö
3-5)
Install a new cylinder head cover O-ring and
install the cylinder head cover.
Install and tighten the cylinder head cover
bolts.
Torque:: 0.8~1.2kgf-m
N
u
t
Washe
r
Cylinder Head Cove
r
O-rin
g
Cam Chain Tensione
r
Sealin
g
Bol
t
Push RodLock Pawl
Camshaft Holde
r
S
p
rin
g
• Apply engine oil to the threads of the
cylinder head nuts.
• Diagonally tighten the cylinder head
nuts in 2～3 times.
＊
When installing the tensioner, release the
lock pawl and push the push rod all the
way in.
＊
Be sure to install the O-ring into the
groove properly.
＊

KYMCO SUPER8 50 Specifications

General

Displacement	49.5 cc
Fuel System	Carburetor
Front Suspension	Telescopic Fork
Rear Suspension	Single Shock
Front Brake	Disc
Rear Brake	Drum
Ignition	CDI
Cooling System	Air
Transmission	Automatic CVT
Starting System	Electric and kick start
Front Tire	120/70-12
Rear Tire	130/70-14