54
FEATURES & CONTROLS
To return the cargo bed to its
normal position, press down on
the front of the bed until it seats
to the frame and the release
latch is reengaged. After the
latch is engaged, lift up on the
bed to make sure it is secured.
CARGO BED
Opening & Closing the Tailgate
Your UXV500’s cargo bed has a tailgate which can be unlatched
to ease the loading and unloading of cargo.
To open the tailgate, release both of the latches 1 by pulling the
lever outward and disengage the wire hoop from the hook on the
cargo bed. Once the latches are released, pull the top of the tail-
gate towards you (it is hinged on its bottom edge).
11
11
1
11
11
1
PULL
To close the tailgate, lift it back
up and secure both of the
latches.
Tilting the Cargo Bed
Your UXV500’s cargo bed can tilt to aid in the removal of loose
cargo, such as gravel.
To tilt the cargo bed, slide the release lever 2 to the right and lift
up on the forward edge of the bed (it is hinged at its back edge).
Lift the bed up slowly until it reaches its stop.
22
22
2
Never drive your UTV with the tailgate open or the cargo
bed in the tilted position. This could cause instability which
could lead to a tip over or an accident.
NOTE: The maximum load capacity of the cargo bed
is
418 lb (190 kg).
To Next Page
Loading...
Need help?
General
