EasyManuals Logo

KYMCO Vitality 50 User Manual

KYMCO Vitality 50
275 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background image
3. LUBRICATION SYSTEM
3
5
VITALITY 50
DAMPING DEVICE
SHOCK ABSORBERS
Oil Leak/Damage
Fully apply the front brake and check the
action of the front shock absorber by
compressing it several times.
Check the entire shock absorber assembly
for looseness or damage.
Check the action of the rear shock absorber
by compressing it several times.
Check the entire shock absorber assembly
for looseness or damage.
TRANSMISSION GEAR OIL
TRANSMISSION OIL
MRASUREMENT
1.Place the scooter on its main stand on
level ground. After the engine stops for
2~3 minutes.
2.Remove the oil filler bolt (1) and check
the oil level (2). It should be up to the
brim of the hole. If the level is low, add
oil to raise it to the proper level.
3.After refilling, securely tighten the bolt
(1).
Torque: 1.01.5kgf-m
Specified Gear Oil: SAE10W90#
TRANSMISSION OIL
REPLACEMENT
1.Place the scooter on a level place.
2.Place a container under the engine.
2-Stroke

Table of Contents

Other manuals for KYMCO Vitality 50

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KYMCO Vitality 50 and is the answer not in the manual?

KYMCO Vitality 50 Specifications

General IconGeneral
Displacement49 cc
Cooling SystemAir-cooled
Fuel SystemCarburetor
TransmissionCVT automatic
Front SuspensionTelescopic fork
Rear SuspensionSingle shock
Front BrakeDisc
Rear BrakeDrum
IgnitionCDI
Front Tire120/70-12
Rear Tire130/70-12
Wheelbase1, 280 mm
Fuel Capacity5 liters
Starting SystemElectric & Kick
Engine Type2-stroke, single-cylinder

Related product manuals