KYMCO Vitality 50 User Manual

3. LUBRICATION SYSTEM
3
-
15
VITALITY 50
IGNITION APPARATUS
Spark Plug
Remove the frame center cover.
Remove the spark plug cap and spark plug.
Check the spark plug for wear, fouling and
carbon deposits.
Remove the fouling and carbon deposits
with a spark plug cleaner or wire brush.
Specified:
2-Stroke: NGK-BR8HSA
4-Stroke: NGK-C7HSA
Spark Plug Gap: 0.60.7mm
Ignition Apparatus
Remove the A.C. generator fan cover.
(8-3)
Remove the four bolts from the fan and
then remove the fan. (8-3)
Warm up the engine and check the ignition
timing with a timing light.
When the engine is running at the specified
rpm, the ignition timing is correct if the “F”
mark on the flywheel aligns with the index
mark on the crankcase within ±2°.
Ignition Timing:
2-stroke: 13.5°±2°/3000rpm
4-stroke: 28°±2°/4000rpm
Gap, Wear and
Fouling Deposits
Washer Damage
Cracks
0.6
-
0.7mm
Index Mark
F Mark
The CDI ignition timing is not
adjust-able. If the timing is incorrect,
check the CDI unit, ignition coil and
A.C. generator and replace any faulty
parts.


KYMCO Vitality 50 Specifications

General

Brand	KYMCO
Model	Vitality 50
Category	Scooter
Language	English