KYMCO Vitality 50 User Manual

5. ENGINE REMOVAL/INSTALLATION
5
-
5
VITALITY 50
ENGINE HANGER BRACKET
INSPECTION
Inspect the stopper rubbers and bushings for
damage and replace with new ones if
necessary.
ENGINE INSTALLATION
Install the engine in the reverse order of
removal.
Torque Values:
Engine mounting bolt : 4.55.5kg-m
Rear shock absorber lower mount bolt:
2.43.0kg-m
Perform the following inspections and
adjustments after installation.
• Throttle cable
• Oil pump control cable (

3-7)
• Rear brake cable (

3-2)
• Oil pump bleeding (

4-7)
Bushings
Engine Hanger
Stopper Rubbers
Cables and wires should be routed
properly.


KYMCO Vitality 50 Specifications

General

Brand	KYMCO
Model	Vitality 50
Category	Scooter
Language	English