KYMCO Vitality 50 User Manual

4. LUBRICATION SYSTEM
4
-
8
VITALITY 50
OIL TANK (2-STROKE)
OIL TANK REMOVAL
Remove the rear body cover. (

13-6)
Disconnect the oil meter connector (1).
Remove the two bolts from the oil tank.
Disconnect the oil inlet line (2).
Drain the oil inside the oil tank into a clean
container.
Remove the oil tank.
The installation sequence is the reverse of
removal.
•
Connect the oil line prope
rly.
• Bleed air from the oil pump after
installation.
• The oil tube clip (at the oil tank side)
must be locked from inside of the oil
tube joint.


KYMCO Vitality 50 Specifications

General

Displacement	49 cc
Cooling System	Air-cooled
Fuel System	Carburetor
Transmission	CVT automatic
Front Suspension	Telescopic fork
Rear Suspension	Single shock
Front Brake	Disc
Rear Brake	Drum
Ignition	CDI
Front Tire	120/70-12
Rear Tire	130/70-12
Wheelbase	1, 280 mm
Fuel Capacity	5 liters
Starting System	Electric & Kick
Engine Type	2-stroke, single-cylinder