Kyocera ECOSYS FS-2100D Service Manual

2P7/2R0/3PN
1-5-22
(2) Detaching and refitting the separation needle unit
Procedure
1. Remove the transfer roller.
2. Release six hooks of separation needle
unit by rotating and then remove the
separation needle unit upward.
3. Check or replace the separation needle
unit and refit all the removed parts.
*: Check certainly being fixed at the time of
attachment.
Figure 1-5-39
Separation needle unit
Hooks

Kyocera ECOSYS FS-2100D Specifications

General

Brand	Kyocera
Model	ECOSYS FS-2100D
Category	Printer
Language	English