Kyocera ECOSYS FS-2100D Service Manual

2P7/2R0/3PN
2-3-18
YC4
1 LFANN - 0/24 V DC LFM: On/Off
Connected to
the LSU fan
motor
2 LFANVCC O 0/24 V DC LEM drive signal
YC7
1 +3.3V12 O 3.3 V DC 3.3 V DC power output to WTS(LED)
Connected to
the waste
toner sensor
2 WTLEDN I 0/3.3 V DC WTS(LED): On/Off
3 WTSENS I Analog WTS output signal
4 +3.3V6 O 3.3 V DC 3.3 V DC power output to WTS
YC8
1 +3.3V8 O - 3.3 V DC power output to MPS
Connected to
the MP paper
sensor
2 GND - - Ground
3 MEFSENS I 0/3.3 V DC MPS: On/Off
YC9
1 +3.3V11 O 3.3 V DC 3.3 V DC power output to DUS
Connected to
the duplex
sensor 1
2 GND - - Ground
3 DUJAMSEN1
N
I 0/3.3 V DC DUS: On/Off
YC10
1 REARSWN I 0/3.3 V DC RECSW: On/Off
Connected to
the rear
cover switch
2 GND - - Ground
YC11
1 ENVMOT O 0/24 V DC FUPRM: On/Off
Connected to
the fuser
pressure
release
motor
2 GND - - Ground
YC12
1 OUTB3 O 0/24 V DC SBM B3 drive control signal
Connected to
the shiftback
motor
2 OUTB1 O 0/24 V DC SBM B1 drive control signal
3 OUTA3 O 0/24 V DC SBM A3 drive control signal
4 OUTA1 O 0/24 V DC SBM A1 drive control signal
YC13
1 FACEDDRN O 0/24 V DC FSSOL: On/Off
Connected to
the feed shift
solenoid
2 +24V6 O 24 V DC 24 V DC power output to FSSOL
3 FACEUDRN O 0/24 V DC FSSOL: On/Off
Connector Pin Signal I/O Voltage Description

Kyocera ECOSYS FS-2100D Specifications

General

Brand	Kyocera
Model	ECOSYS FS-2100D
Category	Printer
Language	English