Installation
Installing in Windows Vista and Windows XP on page 1-2
Custom Installation
Installing in Windows Vista and Windows XP with a USB Connection on
page 1-4
Installing in Windows Vista and Windows XP with a Network Connection on
page 1-5
Installing in Windows Vista and Windows XP with a Parallel Connection on
page 1-6
Note: KPrint installs a client port monitor that lets Windows TCP/IP print
from any network card connected to a printing system. KPrint supports LPR
and IPP printing. For the KPrint Installation instructions, refer to your
Product Library CD. KPrint uses a stand-alone installer.
Installing Utilities
On the Installation Method screen, click Utilities to install printer utilities. You
can also select utilities to install during the Custom Installation procedure.
Upgrading Driver Components
If the installation wizard detects older driver or utility components, the Software
Component Upgrade page appears.
1
Choose the component to upgrade. Click Next.
2
Confirm your upgrade settings. To start the upgrade, click Upgrade.
3
When the upgrade completes, click Next. The Installation Method page
appears.
Express Installation
Express Mode applies to driver installation for a USB or network connection
only. The installation wizard discovers printers that are turned on, and
connected by USB and network cable. In Custom Mode, you are able to select
the installation packages and specify the port.
Installing in Windows Vista and Windows XP
This section describes the express installation procedure of the driver software
in Windows Vista and Windows XP.
1
Ensure that your printer and computer are turned on and connected by USB or
network cable.
Note: If the Found New Hardware Wizard dialog box appears during the
installation process, click Cancel. If the Hardware Installation warning dialog
box appears, click Continue Anyway.
2
On the Installation Method page, click Express Mode.
User Guide
1-2
To Next Page
Loading...
Need help?
General