8-16
Setup and Registration (System Menu) > System Menu
Secure Settings
Ping
Restart Network
Primary Network
[System Menu/Counter] key > [ā²] [ā¼] key > [System/Network] > [OK] key > [ā²] [ā¼] key > [Primary Network] >
[OK]key
eSCL over SSL Selects whether to receive scanned documents using eSCL over SSL.
*1, *3
Value: Off, On
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
This function is displayed when [eSCL over SSL] is set to [On].
Wi-Fi
*2
Wired Network
*1 The setting will be changed after restarting the device or network.
*2 Displayed only when the wireless network function is available on the machine.
*3 Set "SSL" to [On] in Secure Settings.
Secure Settings (page 8-16)
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
SSL Select whether or not to use SSL.
Value: Off, On
Item Description
Ping Checks if communication with the destination by entering the host name or IP address of the
destination is possible.
Item Description
Restart Network Restarts the network.
This function is displayed when the wireless network function is available on the machine.
Item Description
Primary Network Specify the network to be used for the send function, the network authentication and
connecting to external address book.
Value: Wi-Fi, Wired Network
Item Description
To Next Page
Loading...
Need help?
General
