8-22
Setup and Registration (System Menu) > System Menu
Timer Setting
[
System Menu/Counter
] key > [
ā²
] [
ā¼
] key > [
Common Settings
] > [
OK
] key > [
ā²
] [
ā¼
] key > [
Timer Setting
] > [
OK
] key
Configure settings related to the time.
Item Description
Auto Panel Reset If no jobs are run for a certain period of time, automatically reset settings and return to the
default setting. Select to use Auto Panel Reset or not.
Value: Off, On
The time allowed to elapse before the panel is reset is set with the following:
PanelReset Timer (page 8-22)
PanelReset Timer
If you select [
On
] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset.
Value: 5 to 495 seconds (in 5 second increments)
This function is displayed when [Auto Panel Reset] is set to [On].
Sleep Level (models except for
Europe)
Select the Sleep level.
Set the Energy Saver mode to reduce power consumption even more than
Quick Recovery
mode.
Value: Quick Recovery, Energy Saver
(Detailed settings)
Set whether to use the Energy Saver mode for the following functions individually:
ā¢Network
ā¢ Card Reader
*1
ā¢FAX
*2
Value: Off, On
When the machine enters Energy Saver, the ID card cannot be recognized.
Sleep Rules (models for
Europe)
Select whether to use the Sleep mode for the following functions individually:
ā¢Network
ā¢ Card Reader
*1
ā¢FAX
*2
Value: Off, On
When the machine enters Energy Saver, the ID card cannot be recognized.
Sleep Timer Set amount of time before entering Sleep.
Value
For Europe
1 to 120 minutes (1 minute increments)
Except for Europe
1 to 240 minutes (1 minute increments)
Sleep (page 2-20)
To Next Page
Need help?
General
