4-115
Operation Panel
2 Press [OK]. The Retry Interval screen appears.
3 Press or to set the Retry Interval.
4 Press [OK]. The Retry Interval setting is stored and the Retry
Settings menu reappears.
Auto Err. Clear (Auto error clear setting)
If an error that still allows you to continue printing occurs, the next received data is automatically printed after a set period
of time elapses.
For example, if the printer is shared over a network as a network printer and one person causes one of the above errors,
after the set period of time elapses, the data sent from the next person is printed.
The auto clear errors are:
KPDL error.
SSD error.
RAM disk error.
SD card error.
Incorrect account ID.
Account error.
Cannot duplex print on this paper.
Job Accounting restriction exceeded.
No multi copies.
USB memory error.
Restricted by Job Accounting.
Job not stored.
For the procedure for setting the automatic error recovery time, refer to Err. Clear Timer (Setting the error clear time) on
page 4-116.
1 In the Timer Setting menu, press or to select Auto Err.
Clear.
2 Press [OK]. The Auto Err. Clear screen appears.
3 Press or to select whether automatic error recovery is enabled.
4 Press [OK]. The automatic error recovery setting is set and the
Timer Setting menu reappears.
Retry Interval:
50
(10 - 60)
sec.
Auto Err. Clear:
Off
01
On
02
*
To Next Page
Loading...
Need help?
General
Weight and Dimensions
