Kyocera FS-1118 User Manual

Preparations
OPERATION GUIDE 3-5
Registering the Default Gateway
.
1 Access Default Gateway.
If you are unsure how to use this route map refer to Accessing Menu Items on
page 3-3.
2 Use the numeric keys to enter each segment of the Default Gateway in turn,
pressing
X or [*.] to move between segments.
3 Press Enter on completion.
If you make an error in entering a portion of the Default Gateway, press
W to
return to the previous block of digits and re-enter the correct number.
4 When you complete all of the network setting, press right Select. The message
display returns to the basic screen.
Date and Time Settings
Setting the Time Zone
You can also make this setting using COMMAND CENTER. For details on
COMMAND CENTER, refer to the Advanced Operation Guide.
1 Access Time Zone.
If you are unsure how to use this route map refer to Accessing Menu Items on
page 3-3.
2 Press S or T to select the time zone that you are in.
3 Press Enter. The message display shows Completed and returns to the Date/
Timer Set. screen.
4 Press right Select. The message display returns to the basic screen.
System Menu/
Counter
S or T
System Setting
Enter
S or T
Network Setting
Enter
S or T
TCP/IP Setting
Enter
S or T
Default Gateway
Enter
System Menu/
Counter
S or T
Date/Timer Set
Enter
S or T
Time Zone
Enter

Kyocera FS-1118 Specifications

General

Brand	Kyocera
Model	FS-1118
Category	All in One Printer
Language	English