8-9
Troubleshooting
The IPv6 address entered in the host name is not enclosed in brackets [ ]. To
enter the IPv6 address, enclose the address in brackets [ ].
(e.g., [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
Displayed when the envelope switches are set to envelope mode.
Press the power switch to turn off, and then press it again to turn on. If this
message still remains, press the power switch to turn off, and contact your
service representative.
An error occurred when obtaining user information after the authentication. Log
in again.
The file or box selected does not exist.
Check that the box has not been deleted, or that the file has not been deleted or
moved.
The SD/SDHC Memory Card inserted in the printer is not formatted, and
therefore cannot be read or written. To format an SD/SDHC Memory Card,
follow the procedure in Format SD Card (Formatting the SD/SDHC memory
card) on page 4-83.
Message Corrective Action
To Next Page
Loading...
Need help?
General
