8-11
Troubleshooting
Enter the correct Login User Name or Login Password.
Enter the correct password.
This message is displayed when the Job Accounting function is enabled and an
attempt has been made to exceed the print limit set for each account. To return
the printer to the print-ready status, press [OK].
For more information, refer to Job Account.Set. (Job Account setting) on page
4-120.
Printing using the Custom Box and Job Box function failed because there was
insufficient space available on the SSD, RAM disk or SD/SDHC Memory Card,
or because the RAM disk was disabled when demounting the SSD. To print an
error report and return the printer to the print-ready status, press [OK].
Current print processing cannot continue because of occurrence of KPDL error.
To print out an error report, display KPDL Error Rpt. from the menu system,
and select On. Press [OK] to resume printing. You can abandon printing by
pressing [Cancel].
If Auto Error Clear is set to On, printing will be automatically resumed after a
preset period of time.
The added box exceeded the maximum number of box.
Delete it if there is a unnecessary box.
For details, refer to Custom Box operation (Box creation, editing and
deletion) on page 5-5.
Message Corrective Action
To Next Page
Loading...
Need help?
General
