Operator's Manual – Stacker Vendor
©
LAI GAMES
Page 6
FITTING PRIZES TO THE PRIZE ARM
STEP ONE: Removal of Prize Locking Pin.
STEP TWO: Attachment of Hanging Ties.
STEP THREE: Loading of Prizes.
1. Unscrew the Prize Locking pin
(left-hand thread), by turning it
in a clockwise direction.
2. Remove the pin by pulling it all
the way out.
Attach the prizes securely to the
Hanging Ties.
* NOTE! *
Be sure to allow a loose, 4-finger gap in
the ‘hanging tie’ to ensure that the
‘hanging tie’ does not interfere with the
operation of the Prize Arm mechanism.
Load the prize arm by sliding the
Hanging Tie over the entire arm, as
shown making sure that the prizes are
facing towards the customer.
* NOTE! *
Stacker Giant is shipped from the
factory with the Locking Pins in the
Cashbox.
1
2
Allow a loose,
4-finger gap in
the hanging tie.
To Next Page
Loading...
Need help?
General
