EasyManuals Logo
Home>LAI Games>Arcade Game Machines>Stacker Vendor

LAI Games Stacker Vendor User Manual

LAI Games Stacker Vendor
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Operator's Manual – Stacker Vendor
©
LAI GAMES
Page 11
SOUND, LAMPS & DISPLAY TEST
ENTER The Sound, Lamp & Display test is entered from Attract mode by
pressing the test button once.
DURING THE TEST:
o Game music and a voice over will be played.
o The Prize Arm Indicator LEDs will light up in sequence.
o The Credit display will count from 0000 to 9999 and then repeat.
o The LED Playfield Display panel will run a test pattern sequence.
o The Continue, Start/Stop and Select button lamps will flash on and off
EXIT The Sound, Lamp & Display test is exited by pressing the test button.
The next test will be switch test.
SWITCH TEST
ENTER The Switch Test can be entered by pressing the Test button once while
in the Sound, Light & display test or by pressing the Test button twice
while in Attract mode,
C
-
X
X
will be displayed on the 4-digit
display where ‘XX’ is a number representing the switch that is active.
TESTING THE GAME SWITCHES
All game switches have a code from C1 to C10 as tabled below. By
activating any of the switches, their code will be displayed on the 4-
digit display. If no switches are active then
C
-
0
0
will be
displayed.
CODE DISPLAY SWITCH FUNCTION SWITCH LOCATION
C0
C
-
0
0
No Switch Active -
C1
C
-
0
1
Ticket Notch Active Ticket Door (if fitted)
C2
C
-
0
2
Service Switch Active Service Panel
C3
C
-
0
3
Start/Stop Button Active Control Panel
C4
C
-
0
4
Coin 1 Switch Active Coin Door
C5
C
-
0
5
Coin 2 Switch Active Coin Door
C6
C
-
0
6
Select Button Active Control Panel
C7
C
-
0
7
Prize Sensor Active Prize Box
C8
C
-
0
8
Continue Button Active Control Panel
C9
C
-
0
9
Minor Prize Button Active Not Used
C9
C
-
1
0
Tilt Switch Active Cabinet Back
Normal condition for the game is
C
-
0
0
, no switches are active.
* NOTE! *
If there is an active error displayed, press the red test button once to try and
clear the error.
If the error code will not clear, it can be bypass by quickly pressing the red
test button twice.
* NOTE! *
Several switches can be simultaneously activated in Switch test. The display
will then consecutively show their codes, indicating which switches are
active. However, it is much easier to test the game switches individually..

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LAI Games Stacker Vendor and is the answer not in the manual?

LAI Games Stacker Vendor Specifications

General IconGeneral
BrandLAI Games
ModelStacker Vendor
CategoryArcade Game Machines
LanguageEnglish

Related product manuals