Need help?Do you have a question about the Lamtec GFI 48 and is the answer not in the manual?
Instructions facilitate safe and efficient handling of the pilot burner GFI and its variants.
Instructions must be read and understood by personnel before commencing any work.
Manual must be kept safe and accessible to personnel throughout the device's service life.
Defines symbols (DANGER, WARNING, CAUTION, NOTICE) used to convey safety information.
Product complies with safety rules. Use only in perfect condition and according to manual.
Warnings for installation, commissioning, and operation of electrical devices and flame scanners.
Covers intended use, conditions of use, and essential installation guidelines.
Details the components included in the product's delivery package.
Information on the rating plate located on the pilot burner housing.
Details the different versions (A, B, C) of the pilot burner and their components.
Lists materials required for installation, not included in the scope of supply.
Discusses the device's limited lifespan and conditions affecting it.
Presents comprehensive technical specifications for GFI pilot burners and accessories.
Describes the construction of pilot burner versions A and B, including main components.
Explains the operating modes of the pilot burner and the function of its components.
Guidelines for safe transport of the pilot burner, considering its weight and bulk.
Instructions for assembly and detailed electrical connection for pilot burner versions A, B, and C.
Safety regulations and steps for commissioning, including leak and functional tests.
Details wear parts for the GFI pilot burner that require replacement.
Steps for preparing the system and burner for maintenance, including safety precautions.
Step-by-step instructions for performing maintenance on the pilot burner.
Contact details for LAMTEC Service/Support for questions or assistance.
Information regarding manufacturer's warranty conditions and terms of delivery.
Guidance on how to act correctly when an error occurs during operation.
Provides a table of common faults, their causes, and rectification steps.
Emphasizes safety-relevant repairs must only be done by the manufacturer.
Contact details for obtaining repair services from LAMTEC.
Procedure for safely taking the pilot burner out of operation and removing it.
Instructions for storing the ignition burner properly after maintenance.
To Next Page
General