67
11 Order Information
11 Order Information
Sliding flange Order no.
GFI48 sliding flange with O-ring seal and grub screws, DN50 PN6, 1.4571 646R1151
GFI48 two-hole sliding flange with O-ring seal and grub screws, 1.4571 646R1152
GFI70 sliding flange with O-ring seal and grub screws, DN65 PN6, 1.4571 646R2151
GFI89 sliding flange with O-ring seal and grub screws, DN80 PN6, 1.4571 646R3151
Commissioning / maintenance / service Order no.
Inspection diode for GFI 646R0100
Spare parts Order no.
For GFI48: Ionisation and ignition electrodes with spacer and centring holder for the electrode rods 646R1115
For GFI48: Spacer and centre holder with insulator for the electrode rods 646R1116
For GFI70: Ionisation and ignition electrodes with spacer and centring holder for the electrode rods 646R2115
For GFI70: Spacer and centre holder with insulator for the electrode rods 646R2116
For GFI89: Ionisation and ignition electrodes with spacer and centring holder for the electrode rods 646R3115
For GFI89: Spacer and centre holder with insulator for the electrode rods 646R3116
Nozzle for natural gas GFI48 646R1105
Nozzle for propane gas GFI48 646R1106
Nozzle for natural gas GFI70 646R2105
Nozzle for propane gas GFI70 646R2106
Nozzle for natural gas GFI89 646R3105
Nozzle for propane gas GFI89 646R3106
Flame stabiliser for GFI48 material 1.4301/1.4305 646R1100
Flame stabiliser for GFI70 material 1.4301/1.4305 646R2100
Flame stabiliser for GFI89 material 1.4301/1.4305 646R3100
Ignition transformer for GFI ignition systems, 230VAC / 8kV 646P1040
Ignition transformer for GFI ignition systems, 120VAC / 8kV 646P1041
Ionisation flame scanning (IFM) F130i, SIL3, 230 VAC power supply voltage, for DIN rail, continuous operation 659G1001
Ionisation flame scanning (IFM) F130i, SIL3, 120 VAC power supply voltage, for DIN rail, continuous operation 659G1002
Accessories Order no.
Connection cable with mating connector for plug connection 646R0150
Double nipple 3", material: 1.4408 646R9001
Double nipple 1" outer/outer, stainless steel 646R9015
Hexagon reducing double nipple NPT 3/4" on R 1/2", material: 1.4571 646R9030
Hexagon reducing double nipple NPT 11/4" on R 1", material: 1.4571 646R9031
Stainless steel manometer 0..160 mbar (0 ... 2.32 psi), housing Ø 63mm (2,48 in), connection G1/8" vertical 646R9040
Sliding nipple with O-ring seal and 3" external thread, 1.4301, for GFI48 646R9055
Needle valve 1 1/4" NPT internal thread, material 1.4571 646R9058
Needle valve 3/4" NPT internal thread, material 1.4571 646R9059
Ball valve for gas 1/2" internal/external, with DVGW approval, brass 646R9060
Ball valve (Mini) Ballofix for gas 3/4" internal/external, brass 646R9065
Ball valve (stainless steel) 3" IG/IG with lever, DN80 646R9069
Air regulation sleeve 1" internal/internal, black cast iron 646R9102
Air regulation sleeve 1 1/2" internal/internal, black cast iron 646R9103
To Next Page
Loading...
General