4: Configuration Using Web Manager
Figure 4-3. Network Settings
Network Mode
1. Click Network from the main menu.
2. Note the following:
Wired Only is the only choice. It enables the Ethernet network
connectivity.
Automatic IP Address Configuration
An IP address can be assigned automatically. You then enter related network
settings.
To assign an IP address automatically:
1. On the main menu, click Network.
2. Select Obtain IP address automatically.
3. Enter the following (as necessary):
Select Enable to permit the Bootstrap Protocol (BOOTP).
server to assign the IP address from a pool of addresses
automatically. Enable is the default.
Select Enable to permit the Dynamic Host Configuration
xPico User Guide 20
To Next Page
Loading...
Need help?
General
