5 Operation Voltage
The Distillation Apparatus must be connected to the mains supply either by a correctly installed shock-
proof socket, or, with a fixed connection, to an on-site main switch. The Distillation Apparatus is a pro-
tection class I electrical appliance, a connection to the earth conductor (PE) must be ensured. For
information on the required mains fuse please view Technical Data, chapter 11 of this manual.
The electrical connection must ensure an all-pole separation from the mains at any time. Shock-
proof sockets or main switches to separate the Distillation Apparatus from the mains must be installed
in such a way as to ensure they can be clearly identified and are easily accessible at any time.
The mains connection cable must not touch any hot surfaces of the unit. It may not lead underneath
the unit. The main switch (I) of the Distillation Apparatus must be off (position O). The voltage on the
nameplate (at the left-hand side of the unit) must be identical to the mains voltage. If they are identical,
connect the unit to the mains. Please also refer to chapter 13 of these operating instructions "Connec-
tion to the Mains".
6 Water Connections
All water connections of the Distillation Apparatus, except the distillate withdrawal tap on the front, are situated on the
right-hand side of the unit.
Hoses for water inlet and outlet are not included in the standard scope of supply.
To Next Page
Loading...
Need help?
General
