LAUNCH
31
*ID: indicates the sensor ID.
*P: indicates the tire pressure.
*T: indicates the tire temperature.
Vol: indicates the battery power level.
Note: The sensor ID format, the measurement units of the re pressure and
temperature can be set to your preference in the
module.
5.2 Program Sensor
This function allows users to program the sensor data to the LAUNCH-sensor
and replace faulty sensor with low battery life or one that is not functioning.
The following options are available for programming LAUNCH-sensor: Auto
Create, Manual Create, Copy ID by Activation and Create Multi-sensor (1-8).
Select PROGRAM SENSOR and press the OK button to enter the following
screen.
Figure 5-9
5.2.1 Auto create
This function is designed to program the LAUNCH-sensor by applying random
IDs created according to the test vehicle when it is unable to obtain the original
sensor ID.
Select the wheel which needs to be programmed on the tool, place a
LAUNCH-sensor close to the TPMS antenna of the tool, and select CREATE
SENSOR to create a new random sensor ID.
To Next Page
Loading...
Need help?
General
