LAUNCH
1
1. Introduction
This TPMS activation & diagnostic tool is specially developed by LAUNCH,
which enables users to trigger TPMS sensor, program TPMS sensor, perform
the relearning procedure and check sensor part number. Additionally, it also
supports all 10 modes of OBD II test for a complete diagnosis.
With built-in help menus and code denitions, diagnosing and repairing that
dreaded Check Engine Light is now easier than ever!
This tool provides the following functions:
TPMS:
• Trigger the TPMS sensor
• Program the TPMS sensor
• Provide TPMS relearning procedures and sensor OE number lookup
OBD diagnosis:
• Read dynamic data streams and MIL
• Read readiness status
• Freeze frame data
• Read DTCs
• Clear DTCs
• O
2
sensor test
• On-board monitor test
• Read vehicle information
Moreover, it can be updated via the memory card to keep synchronized with
the latest available software version.
Note: This tool may automacally reset while being disturbed by strong stac
electricity. THIS IS A NORMAL REACTION.
This tool is specially designed to work with all OBD II compliant vehicles,
including Controller Area Network (CAN). It is required by EPA that all 1996
and newer vehicles (cars and light trucks) sold in the United States must be
OBD II compliant and this includes all American, Asian and European vehicles.
A small number of 1994 and 1995 model year gasoline vehicles are OBD II
compliant. To verify if a 1994 or 1995 vehicle is OBD II compliant, check the
following:
To Next Page
Loading...
Need help?
General
