48
www.x431.com +86 755 8455 7891
a fault has been performed) to confirm that the repair has been performed
correctly, and/or to check for Monitor Run Status.
Select I/M Readiness from the Diagnostic Menu and press OK, the screen will
display the I/M readiness result.
Figure 6-11
N/A means not available on this vehicle, INC means incomplete or not ready,
OK means Completed or Monitor OK.
Press
to return to Diagnostic Menu.
4. Data Stream
This option retrieves and displays live data and parameters from the vehicle’s
ECU.
Select Data Stream from the Diagnostic Menu and press OK, the following
screen will appear.
Figure 6-12
To Next Page
Loading...
Need help?
General
