LAUNCH X-431 PRO MINI User Manual
20
on-screen instruction to access the diagnostic software.
Take Demo as an example to demonstrate how to diagnose a vehicle.
1). Tap the “DEMO” to enter the software selection page.
2). Tap “DEMO” to ignore Bluetooth connection and jump to the DEMO system
selection screen.
(Note: No Bluetooth connection is required for DEMO
program.)
Fig. 4-15 Fig. 4-16
3). Tap “Engine”, the system will navigate to the test function menu. See Fig.
4-16.
4.5.1 Read DTC
This function displays the detailed information of DTC records retrieved from the
vehicle’s control system.
Tap “Read DTC” in function menu, the screen will display the diagnostic result.
To Next Page
Loading...
Need help?
General
