Launch X-431 PRO MINI User Manual

LAUNCH X-431 PRO MINI User Manual
33
Fig. 4-24
Now you can use the Wi-Fi printer to print!
If the printer is not found, please reset the printer to default factory settings (refer
to Step 2 for details) and check whether the current device and the printer are on
the same LAN.
B. If you have configured the Wi-Fi printer to the LAN:
2. Tap “Connect to Printer”:
a). If the local network remains as it is, tap “Test Print” directly to test the
printing.
b). If the local network changes, you have to reset the Wi-Fi printer.
4.11.4 Network Test
It enables you to test whether the current network environment is good or not. It
is normal that you may encounter a logout while testing.
4.11.5 About
The software version information and disclaimer are included.
4.11.6 Exit
This option allows you to logout the system.
To logout the current user ID, tap “Exit from current account”.

Launch X-431 PRO MINI Specifications

General

Brand	Launch
Model	X-431 PRO MINI
Category	Medical Equipment
Language	English