Launch X-431 Manual

LAUNCH X-431 Euro Mini User Manual
50
10 FAQ
1. How to save power?
 Please turn off the screen while the tool keeps idle.
 Set a shorter standby time.
 Decrease the brightness of the screen.
 If WLAN connection is not required, please turn it off.
 Disable GPS function if GPS service is not in use.
2. Communication error with vehicle ECU?
Please confirm:
1. Whether the diagnostic cable is correctly connected.
2. Whether ignition switch is ON.
3. If all checks are normal, send vehicle year, make, model and VIN number to
us using Diag. Feedback feature.
3. Failed to enter into vehicle ECU system?
Please confirm:
1. Whether the vehicle is equipped with this system.
2. Whether the diagnostic cable is correctly connected.
3. Whether ignition switch is ON.
4. If all checks are normal, send vehicle year, make, model and VIN number to
us using Diag. Feedback feature.
4. How to reset the tool?
Resetting may cause data loss. Before doing so, please make sure important data
and information has been backed up.
Do the following to reset the tool:
1. Tap “Tablet Settings” -> “Back & Reset”.
2. Tap “Factory data reset”.
3. Tap “Reset tablet”.
4. Tap “Clear all data” to start resetting until the tool automatically reboots.
www.diagtools.eu, Pernavas 43A, Riga, Latvia, LV-1009, +37129416069, info@diagtools.eu

Launch X-431 Specifications

General

Brand	Launch
Model	X-431
Category	Diagnostic Equipment
Language	English