Leica T-Scan 5 User Manual

1.4 Responsibilities
Leica Geosystems AG, CH-9435 Heerbrugg, hereinafter referred to as Leica
Geosystems, is responsible for supplying the product, including the user man-
ual and original accessories, in a safe condition.
The person responsible for the product has the following duties:
•
To understand the safety instructions on the product and the instruc-
tions in the user manual.
•
To ensure that it is used in accordance with the instructions.
•
To be familiar with local regulations relating to safety and accident pre-
vention.
•
To inform Leica Geosystems immediately if the product and the applica-
tion becomes unsafe.
•
To ensure that the national laws, regulations and conditions for the
operation of the product are respected.
1.5 Hazards of Use
1.5.1 General
WARNING
Unqualified installation on automatic machines and robots
This action may result in personal or material damage.
▶
This product may be installed on automatic machines and robots only
by an appropriately trained and qualified specialist.
CAUTION
Dropping, misusing, modifying, storing the product for long periods or
transporting the product
Watch out for erroneous measurement results.
Precautions:
▶
Periodically carry out test measurements and perform the field adjust-
ments indicated in the User Manual, particularly after the product has
been subjected to abnormal use as well as before and after important
measurements.
Manufacturer of
the product
Person responsible
for the product
Safety Directions 7

Leica T-Scan 5 Specifications

General

Brand	Leica
Model	T-Scan 5
Category	GPS
Language	English