16 of 21
17 of 21
countdown displayed. When the countdown reaches 0 (zero) the alarm is
triggered again.
Press Standby or Alarm to fully cancel a sounding alarm and switch the radio
to standby.
5.3 Sleep
To set the sleep timer while the radio is playing Press Sleep. You can choose
the sleep delay time in minutes from: Sleep Off | 15 |30 | 45 | 60 | 90.
Use select control button to cycle through the options (or press Sleep
repeatedly) then press Select to choose the displayed option.
Once you select a sleep delay period, the display returns to the Now playing
screen displaying a Crescent moon icon and the remaining time, in minutes,
before the sleep time expires.
After the sleep delay period the radio switches to standby mode.
6 System settings
The System Settings allow you to tailor the CR2 with a variety of options to
suit you.
To access system settings from any mode Select Menu >System Settings >,
then choose from the various options as described in the menu as below.
The System Setting Menu options are:
Ÿ Sleep
Ÿ Alarm
Ÿ Equaliser
Ÿ Time/Date
Ÿ Backlight
Ÿ Language
Ÿ Factory Reset
Ÿ Software upgrade
Ÿ Software version
To navigate through the menus
The following controls are used to move about the menu tree to choose and
select the required settings:
Select – (pressing the Select control button) this selects the currently displayed
option, if the option has a further sub-menu the first option of the sub-menu is
displayed. If the option is a setting value, the displayed value is selected and
either the next setting is highlighted or, if there are no further settings, the
display returns to the parent menu for that setting.
Select control button – cycles forwards and backwards through the current menu
or setting options.
Back – jumps back to the parent menu of the currently displayed menu or setting.
Menu to return to the Now Playing screen.
6.1 Equalizer
This presents a My Equaliser option to allow you to create your own equaliser
settings.
My EQ… | Normal | Classic | Jazz | Pop | Rock | Speech
6.1.1 My EQ setup…
This option allows you to set a bias in the treble and bass audio frequencies and
turn 'Loudness' On or Off. Values can be set between -7 (Minus 7) and +7 (plus 7).
Treble – (Use the select control button to choose a bias value between -7 and +7)
Bass – (Use the select control button to choose a bias value between -7 and +7)
Loudness – No or Yes. (When Yes, low-level high and low frequency sounds are
boosted to give a ‘fuller' sound.)
6.2 Time/Date
The time and date can be updated manually or automatically With auto-update,
To Next Page
Loading...
Need help?
General
