18 of 30 19 of 30
Press Info .. Each time you press Info, the next set of
information is displayed, cycling through: RDS Radio text
programme type, frequency, name, mono/stereo, power status,
and date. To return to the default Now playing screen Press and
hold Info .
4.2.4 Settings
Scan settings
By default, FM scans stop at any available station (All stations).
This may include poor quality audio from weak stations.
Options: Strong stations only | All stations
To change the scan settings, to stop only at stations with good
signal strength
Select Menu > Scan setting then Strong stations only.
Audio settings
By default, all stereo stations are reproduced in stereo. For
weak stations, this may result in poor quality audio. The audio
quality can be improved using mono.
Options: Stereo allowed | Forced mono
To play weak stations in mono
Select Menu > Audio setting > Forced mono.
4.3 Bluetooth
Bluetooth mode allows M3 to act as a wireless speaker playing
audio content from a connected Bluetooth capable device.
To enter Bluetooth mode: Press source to choose Bluetooth mode
To connect a Bluetooth capable device.
Use your Bluetooth capable smart device to pair and connect with
the M3.
4.3.1 Display information
The screen displays either a connected or disconnected message
depending on the connection state.
4.4 Aux In mode
Aux In mode plays audio from an external source such as an Mp3
player.
To play audio with Aux In mode,
1. Turn the volume low on both M3 and, if adjustable, the audio
source device.
2. Connect the external audio source to the Aux In 3.5 mm
To Next Page
Loading...
Need help?
General
